Extractor Gauge Controller Dual Channel - MG14

Low cost extractor gauge controller (& ion gauge controller) with full local software and web browser control.

The MG14 Extractor Gauge Controller, in comparison with the MG12 and MG13 models, is able to support one Extractor Gauge, extending the measurement range to 2E-12 mbar (gauge dependent).

The MG14 Extractor Gauge Controller is a dual gauge controller. The first channel can support any Bayard-Alpert ion gauge AND an extractor gauge. The second channel supports any commercially available vacuum gauge based on the 0-10V output standard. As standard, all of Oerlikon-Leybold gauges are supported: ITR 100, ITR 90, DI 200, DI 2000, TTR 211 S, TTR 91, PTR 225. Any others can be implemented as an option.

Although just 1U height, the controller is able to display both gauge channels at once on the large backlit LCD display. The high brightness blue display provides clear readout from large viewing angles and long distances.

A unique feature of the MG14 exctractor gauge controller is the availability of 4 interlocks as standard, each of which can be separately programmed for each channel, including threshold levels and hysteresis. The measurement channels are active immediately upon power-up and ready for emission.

Channel 1 is a dedicated channel for Bayard-Alpert ion gauges AND extractor gauges. It features very flexible ion gauge parameter settings and is therefore suitable for use with almost all commercially available third party ion gauges. The controller is perfectly suited for 2 stage pumps group units, where two ranges (low and high vacuum) need to be controlled.

The unit is also fully software controlled and web-enabled as standard so that it can be operated over any network, including the internet.

We also supply a full range of ion/extractor gauges at great prices.

MG14 Extractor Gauge Controller - Dual Channel:

Software Controlled & Web Enabled:


 UHV Multi Ion Gauge Controller MG14

Multi Vacuum Gauge Control Software


MG14 Multi Ion Gauge Controller Specifications
Supply voltage
90-240VAC, 50-60Hz

CH1

CH2

Any Bayard-Alpert OR Extractor gauge

Any 0-10V analogue output vacuum gauge

Measurement range
2E-12 to 1000mbar (B-A/extractor gauge dependent)
AccuracyRelative to voltage reading: ±1mV
Units
mbar, Pa, Torr, Micron
Measuring rate
0.05s
Display rate
0.25s
Relay outputs 3 x NO, 1 x NC. Independently programmable for each channel.
User interface
Large LCD display 2 x 20 characters Function keys.
Dimensions240 x 260 x 44
Weight3.8kg


Full specifications for our complete range of multi-gauge controllers can be download here; icon Henniker Scientific - MG Series Ion Gauge Controllers (468.45 kB)

 
Copyright © 2017 Henniker Scientific. All Rights Reserved.